VELUFLEX HERMES 18C
Preformed thermoplastic marking strip which offers good visibility.
ADVANTAGES VELUFLEX HERMES 18C
- Minimized inconvenience during work thanks to immediate return to service.
- Very good day visibility.
- Quick and easy to install using a gas torch.
CONDITIONS FOR USE
- Application
- The support must be dry and clean. Fresh concrete (<1 year) must be sanded and covered with a Veluflex primer (100-150 g/m2). For concrete more than a year old, old layers of bitumen and old hot coating applications, the use of Veluflex primer is recommended.
- After cleaning the asphalt, preheat the substrate to remove moisture from the asphalt.
- Place a veluflex plate/logo in the desired location on the support.
- Start heating the plate/logo by moving the flame continuously to increase the temperature evenly. Stop heating when the material begins to flow, bubble, or elongate.
- Support The substrate must be dry and clean and free from loose particles. For concrete a primer (Veluvine EP-primer) is required.
- Ground temperature limits 5°C
TECHNICAL CHARACTERISTICS
- Colours White
- Luminance > 75 (Y) Qd > 100 mcd.m-2.lx-1 (class Q2)
- Retroreflexion RL > 150 mcd.m-2.lx-1 (classe R3)
- Skid resistance SRT > 0,50 (class S2)
- Specific Gravity env. 2,0 g/cm3
- Lifetime 1.000.000 passages de roues (classe P5)
- Curing time 2 minutes
- Flashpoint < 230°C