Hot-applied coatings THERMOLIT BLANCO / SIN COLOR

Permanent Marking Products

THERMOLIT BLANCO / SIN COLOR

Reflective thermoplastic road-marking compound.

ADVANTAGES THERMOLIT BLANCO / SIN COLOR

  • Easy melting for quick and easy application
  • High night visibility
  • Very durable

    • CONDITIONS FOR USE

  • Application Application temperature 160 - 180°C. The melted compound can be poured into a mould and equalized with a heated spreading-knife. It is also possible to apply using machines with a screed or extruder. To attain the yellow color (RAL 1023) 1 bag of 150 grams BRICOFOR YELLOW 2 RWP (PY83) needs to be mixed well with every 2 bags (20 kg) of Thermolit Sin Color.
  • Support The substrate must be dry and free of loose particles. On fresh concrete (less then 1 year) blasting and application of a primer (Veluvine EP primer) is necessary. On concrete over 1 year old only primer is sufficient.
  • Reflectivity The compound contains glass beads to provide good night visibility. In order to get immediate reflectivity glass beads are to be dropped on at a ratio of 100-200 g/m².
  • Storage Protected from sunlight and frost, the paint will keep for 12 months in its original packaging. The reference is the manufacturing date affixed to the packaging.

    • TECHNICAL CHARACTERISTICS

  • Colours : White / Colourless
  • Luminance > 75 (Y)
  • Skid resistance SRT > 0,45
  • Viscosity Solid at 20°C, Thick fluid at 175°C
  • Density approximately 2.0 g/cm3
  • Curing time 2 minutes
  • Flashpoint Above 230°C
  • Application : Self-propelled machine equipped with a shoe or an extrusion shoe.

    • DOCUMENTS

    Enduit-à-chaud-extrudé-THERMOLIT-SIN-COLOR-EN.pdf

    (pdf 516.20 Ko)